선형 및 볼록 헤드 를 동시에 보유함으로써 하나의 스마트 스캐너로 전신을 스캔 할 수 있습니다. 기기를 뒤집기 만하면 얕은 검사 에서 심층 검사로 전환 할 수 있습니다. 복부 내부의 깊은 구조, 표면 해부학, 사지 및 심장까지.

Pocket ECG monitor provides the collection, analysis, storage and transmission of 12-lead ECG information, which in combination with the Glasgow algorithm provides complete and immediate analysis.

Hospitals

Rural and remote areas

Corporates

Home

Primary health care

Diagnostic Labs

Built-in rechargeable lithium-ion battery	6000mAh for 24 hours recording
Display	4.46 inches, color LCD touch screen Resolution: 480 × 854 pixels
Weight	250g, including the main unit and battery
Dimensions	134mm × 74mm × 17mm

Minimum detectable signal	20μVp-p
ECG input signal range	≤±5mVp-p
Input impedance	≥50MΩ (10Hz)
Calibration voltage	1mV±5%
Depolarization voltage	±500mV
Noise	≤30μVp-p
Pacing pulse display	Pacing pulse with amplitude of 2mV~250mV, duration of 0.1ms~2.0ms, rise time of less than 100µs, and frequency of 100/min can be displayed on the ECG recording.
Speed	5mm/s, 6.25mm/s, 10mm/s, 12.5mm/s, 25mm/s, 50mm/s Accuracy: ±3%
Lowpass filter	75Hz, 100Hz, 150Hz, Off
ADS filter	0.05Hz, 0.32Hz, 0.67Hz
EMG filter	25Hz, 35Hz, 45Hz, Off
AC filter	50Hz, 60Hz, Off
Sensitivity	2.5mm/mV, 5mm/mV, 10mm/mV, 20mm/mV Accuracy: ±5%
Frequency response	0.05Hz～150Hz, 10Hz
Time constant	≥3.2s
Common mode rejection ratio (CMRR)	≥100dB (AC filter on)
Sampling rate	2000 samples / sec
Leads	6/12-lead synchronous acquisition and analysis
A/D conversion	24 bits
HR Measurement range	30bpm~300bpm
HR Measurement Method	Peak-peak detection